I found this solid maple chair at the Goodwill for $9.99, a perfect Saturday afternoon much needed project, so lets get started...see below for step by step "How To".
1. You will need the following items, you may use your own materials or method you don't need to follow exactly.
-Some sort of paint or stain stripper.
-Eye protection wear
-Chemical resistant rubber gloves
-Mask
-Sand paper or steel wool
-scrub brush or tooth brush
-scapper or spatula
-An old rag (discard after use)
&
-A bucket of soap and cold water
(Please make sure you are working in a well ventilated area, like the outdoors.)
This is what I used, it's a spray on stripper. Other options available beside the spray on method (used for small projects). 2. Spray or if you are usuing a non spray... brush on the stripper product. Please read the instructionsons the back of your product to see how long to wait before removing stain or paint. All stripping products may differ. Mine took 15 min to do it's job after the product was applied. The stain or paint will start to bubble and left. 3. Using a scrapper or spatula and going with the grain of the wood, scrap off the stain or paint and discard into a paper bag. May need to reapply product in areas the paint or stain is tuff to remove.
4. Extra help- using a scrub brush or tooth brush will loosen and remove stain in areas that have alot of detail (see above left).
5. You may also us steel wool or sand paper to help remove stain or paint in tuff area or to help smooth out ruff areas.
6. Using Cold water and soap remove excess product residue and wipe areas clean.
8. After Paint has dried, using a sanding block ruff up edges to give it a rustic or antique look. You may ruff up edges and areas as much as you want depending on the look you are going for.
Ta Da!